 |
|
Since the cart must be 30 inches high, subtract the nominal working height of the caster from the 30 inches to determine the length the leg must be. Since this nominal working height is 3 inches, the total length of the leg would be 27 inches. However, we will be column loading our legs, for strength, so we need to subtract an additional 1.5 inches from the leg height, leaving us with a leg 25.5 inches long.
Reenter the AutoQuoterX™ Main Form.
Select 1515-Lite from the drop-down list on the Extrusion tab.
Define the length to be 25.5 inches and include a 7025 3/8-16 end tap on the Left End.
Pick the
button
and select the Node point on the stem of the caster as the insertion point.Accept the rotation of the piece of extrusion you just inserted and then exit the main AutoQuoterX™ form by picking the
button.The leg should now appear as it does in Figure 6.
Figure
6
|
Home |
|
|
||||
|
Copyright © 1989-2004
80/20 Inc., The Industrial Erector Set® All rights reserved.
The information contained in this web site is subject to change without notice. All images and graphics are the property of 80/20 Inc., any unauthorized use without written consent is prohibited. |
||||
